Display bug with console/PNG feature

[misty]

I'm using ipxe.efi compiled on Ubuntu (approximately one week ago).

When booting windows from an iscsi target (SANBOOT) the display is unreadable. I have traced the issue to the following command in my ipxe menu script -

console --picture ipxe.png

Commenting out this line removed the issue. Screenshots of the problem -

http://mistyprojects.co.uk/screenshots/2019.05.20_1.jpg

http://mistyprojects.co.uk/screenshots/2019.05.20_2.jpg

This bug/error was discovered when installing windows to an iscsi target by booting into WinPE (SANHOOK target and booting via wimboot) and running setup.exe. Stage 1 of setup (selecting the target disk and applying install.wim, etc) completed fine and the display was rendered properly. Following the reboot and starting stage 2 resulted in the display issue.

I lengthy thread I started on the reboot.pro forum documents my setup and this issue in much more detail -

http://reboot.pro/topic/22026-sanboot-wi...efi-system

Misty

P.s. let me know if there is anything I can do to try and trace the issue, or if any more details are required.