The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 807 - File: showthread.php PHP 7.3.15 (Linux)
File Line Function
/showthread.php 807 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
IPXE :: Windows 10 installation into iSCSI stuck in second stage (after first reboot)
2019-09-08, 22:18 (This post was last modified: 2019-09-08 22:20 by Andromeda_x.)
Post: #1
IPXE :: Windows 10 installation into iSCSI stuck in second stage (after first reboot)
Hi,

finally I successfully was able to mount iSCSI target for Windows 10 installation.

NOTE: set net0/gateway 0.0.0.0 was a key to reed off 'reconnecting' message for iSCSI target
(internet notes are referring to Windows 7 and I assumed that this line in boot.ipxe is not applicable to Windows 10, my assumption was incorrect)

The first stage of installation went through just fine and computer have rebooted (sanhook was substituted with sanboot before reboot).

The second stage stuck for more than 3 hours, the screen has black background with Windows logo and 'spinner' -- it looks like installation has stuck for quite a while.

Does anything required to be done so that the second stage of the installation was progressing as expected?

Thank you,
Andromeda_x
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
IPXE :: Windows 10 installation into iSCSI stuck in second stage (after first reboot) - Andromeda_x - 2019-09-08 22:18



User(s) browsing this thread: 1 Guest(s)