Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Issue with Intel UNDI, PXE-2.1 (build 083) @ Realtek PCIe GBE v2.31 @ Asus P7H55-M LX
2014-06-16, 14:01 (This post was last modified: 2014-06-17 17:22 by Santana.)
Post: #1
Exclamation Issue with Intel UNDI, PXE-2.1 (build 083) @ Realtek PCIe GBE v2.31 @ Asus P7H55-M LX
When using undionly.kpxe, my machine gets stuck at this point:
Code:
Intel UNDI, PXE-2.1 (build 083)
Copyright (C) 1997-2000  Intel Corporation

This product is covered by one or more of the following patents:
US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776 and
US6,327,625

Realtek PCIe GBE Family Controller Series v2.31 (10/12/09)

CLIENT MAC ADDR: BC AE C5 8F 89 E2  GUID: E05BD17A-8DFE-D511-9C9A-BCAEC58F89E2
CLIENT IP: 10.0.0.10  MASK: 255.255.0.0  DHCP IP: 10.0.0.1
GATEWAY IP: 10.0.0.1



PXE->EB: !PXE at 9B3A:0070, entry point at 9B3A:0109
         UNDI code segment 9B3A:2C5C, data segment 8D6C:DCE0 (565-632kB)
         UNDI devide is PCI 01:00.0, type DIX+802.3
         565kB free base memory after PXE unload
iPXE initialising devices...
All I can do at this point is hitting the reset or power button. Keyboard is dead.

Using ipxe.pxe instead works:
Code:
PXE->EB: !PXE at 9B3A:0070, entry point at 9B3A:0109
         UNDI code segment 9B3A:2C5C, data segment 8D6C:DCE0 (565-632kB)
         UNDI device is PCI 01:00.0, type DIX+802.3
         632kB free base memory after PXE unload
iPXE initialising devices...ok



iPXE 1.0.0+ -- Open Source Network Boot Firmware -- http://ipxe.org
Features: HTTP HTTPS iSCSI DNS TFTP AoE SRP bzImage ELF MBOOT PXE PXEXT Menu

Is this a known issue? Is this an issue at all?

Many thanks in advance for any hints!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Issue with Intel UNDI, PXE-2.1 (build 083) @ Realtek PCIe GBE v2.31 @ Asus P7H55-M LX - Santana - 2014-06-16 14:01



User(s) browsing this thread: 1 Guest(s)