RE: No space left on device (http://ipxe.org/34182006)
Hey,
sadly, the 64-bit version did not help.
Here is the debug output:
Code:
CLIENT MAC ADDR: 94 18 82 0A FC 1C GUID: 30393137-3436-5A43-4A36-333836573946
CLIENT IP: 10.131.33.131 MASK: 255.255.255.0 DHCP IP: 10.131.33.101
GATEWAY IP: 10.131.33.1
PXE->EB: !PXE at 9861:0040, entry point at 9861:00D6
UNDI code segment 9861:6B60, data segment 94AA:3B70 (594-637kB)
UNDI device is PCI 02:00.0, type DIX+802.3
594kB free base memory after PXE unload
Fetching system memory map
FBMS base memory size 579 kB [0,90c00)
INT 15,88 extended memory size 15360 kB [100000, 1000000)
INT 15,e801 extended memory size 15360+64*32512=2096128 kB [100000,80000000)
INT 15,e820 region [0,94000) type 1 (enabled)
INT 15,e820 region [94000,a0000) type 2 (enabled)
INT 15,e820 region [e0000,100000) type 2 (enabled)
INT 15,e820 region [100000,5a661000) type 1 (enabled)
INT 15,e820 region [5a661000,5b4a1000) type 2 (enabled)
INT 15,e820 region [5b4a1000,790ff000) type 1 (enabled)
INT 15,e820 region [790ff000,791ff000) type 2 (enabled)
INT 15,e820 region [791ff000,7b5ff000) type 4 (enabled)
INT 15,e820 region [7b5ff000,7b7ff000) type 3 (enabled)
INT 15,e820 region [7b7ff000,7b800000) type 1 (enabled)
INT 15,e820 region [7b800000,7c000000) type 2 (enabled)
INT 15,e820 region [7c000000,7fc00000) type 2 (enabled)
INT 15,e820 region [7fc00000,80000000) type 2 (enabled)
INT 15,e820 region [80000000,90000000) type 2 (enabled)
INT 15,e820 region [ff800000,100000000) type 2 (enabled)
INT 15,e820 region [100000000,2080000000) type 1 (enabled)
Obtained system memory map via INT 15,e820
iPXE initialising devices...Fetching system memory map
FBMS base memory size 579 kB [0,90c00)
INT 15,88 extended memory size 15360 kB [100000, 1000000)
INT 15,e801 extended memory size 15360+64*32512=2096128 kB [100000,80000000)
INT 15,e820 region [0,94000) type 1 (enabled)
INT 15,e820 region [94000,a0000) type 2 (enabled)
INT 15,e820 region [e0000,100000) type 2 (enabled)
INT 15,e820 region [100000,5a661000) type 1 (enabled)
INT 15,e820 region [5a661000,5b4a1000) type 2 (enabled)
INT 15,e820 region [5b4a1000,790ff000) type 1 (enabled)
INT 15,e820 region [790ff000,791ff000) type 2 (enabled)
INT 15,e820 region [791ff000,7b5ff000) type 4 (enabled)
INT 15,e820 region [7b5ff000,7b7ff000) type 3 (enabled)
Attempting Boot FromwNIC Boot Firmware -- h 1 (enabled)
gg-- Open Source Network Boot Firmware -- hg execution...ok
Features: VLAN HTTP iSCSI DNS TFTP bzImage COMBOOT ELF MBOOT PXE PXEXT Menu
Initialising completed./exports/boot-images/image-deployed/vmlinuz...Fetching system memory map
INT 15,88 extended memory size 15360 kB [100000, 1000000)
Mellanox FlexBoot v3.4.460y size 15360+64*30725=1981760 kB [100000,79050000)
iNT 15,e820 region [0,90c00) type 1 (enabled)
INT 15,e820 region [e0000,100000) type 2 (enabled)
INT 15,e820 region [100000,5a661000) type 1 (enabled)
INT 15,e820 region [5a661000,5b4a1000) type 2 (enabled)0)
INT 15,e820 region [5b4a1000,7905f000) type 1 (enabled) kB [100000,79050000)
INT 15,e820 region [790ff000,791ff000) type 2 (enabled)
INT 15,e820 region [791ff000,7b5ff000) type 4 (enabled)
INT 15,e820 region [7b5ff000,7b7ff000) type 3 (enabled)
INT 15,e820 region [7b7ff000,7b800000) type 1 (enabled)
INT 15,e820 region [7b800000,7c000000) type 2 (enabled)
INT 15,e820 region [7c000000,7fc00000) type 2 (enabled)
INT 15,e820 region [7fc00000,80000000) type 2 (enabled)
INT 15,e820 region [80000000,90000000) type 2 (enabled)
INT 15,e820 region [ff800000,100000000) type 2 (enabled)
INT 15,e820 region [100000000,2080000000) type 1 (enabled)
Obtained system memory map via INT 15,e820e 2 (enabled)
ok 15,e820 region [7fc00000,80000000) type 2 (enabled)
nfs://10.131.33.101/srv/exports/boot-images/image-deployed/initramfs.img... No space left on device (http://ipxe.org/34182006)
Fetching system memory map00,100000000) type 2 (enabled)
FBMS base memory size 579 kB [0,90c00)00) type 1 (enabled)
INT 15,88 extended memory size 15360 kB [100000, 1000000)
INT 15,e801 extended memory size 15360+64*32512=2096128 kB [100000,80000000)
INT 15,e820 region [0,94000) type 1 (enabled)
INT 15,e820 region [94000,a0000) type 2 (enabled)1000000)
INT 15,e820 region [e0000,100000) type 2 (enabled)81760 kB [100000,79050000)
INT 15,e820 region [100000,5a661000) type 1 (enabled)
INT 15,e820 region [5a661000,5b4a1000) type 2 (enabled)
INT 15,e820 region [5b4a1000,790ff000) type 1 (enabled)
INT 15,e820 region [790ff000,791ff000) type 2 (enabled)
INT 15,e820 region [791ff000,7b5ff000) type 4 (enabled)
INT 15,e820 region [7b5ff000,7b7ff000) type 3 (enabled)
INT 15,e820 region [7b7ff000,7b800000) type 1 (enabled)
INT 15,e820 region [7b800000,7c000000) type 2 (enabled)
INT 15,e820 region [7c000000,7fc00000) type 2 (enabled)
INT 15,e820 region [7fc00000,80000000) type 2 (enabled)
INT 15,e820 region [80000000,90000000) type 2 (enabled)
INT 15,e820 region [ff800000,100000000) type 2 (enabled)
INT 15,e820 region [100000000,2080000000) type 1 (enabled)
Obtained system memory map via INT 15,e820pe 2 (enabled)
INT 15,e820 region [100000000,2080000000) type 1 (enabled)
Obtained system memory map via INT 15,e820
ok
Sadly this output is a little bit messed up, as the Mellanox Flexboot, which starts right after the normal netboot, fucks up the VSP output. I hope the important information is still visible.
I thought about testing UEFI boot, but I need some time to do the research on this, so this will probably happen over the weekend. The nodes failing on the ipxe boot are all UEFI capable.
|
Search
Member List
Calendar
Help
/
No space left on device (http://ipxe.org/34182006)
