Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
acronis 2017 uefi
2019-05-15, 17:41
Post: #1
acronis 2017 uefi
Hello !
I can't start acronis 2017 on my computers uefi, it works well in bios legacy.
I took the config here: http://ipxe.org/appnote/acronis.
For information, my other software starts well in uefi with ipxe.efi.
I have an error "kernel panic".
Can you help me?
Thanks!
Find all posts by this user
Quote this message in a reply
2019-05-15, 19:08
Post: #2
RE: acronis 2017 uefi
Please try without quiet on the kernel line, and then post the error message in full, as well as the actual script you are using.

Use GitHub Discussions
VRAM bin
Visit this user's website Find all posts by this user
Quote this message in a reply
2019-05-15, 19:21
Post: #3
RE: acronis 2017 uefi
Thanks for your feedback.

Here is my script:
kernel kernel64.dat initrd=ramdisk_merged64.dat initrd=dat4.dat edd=off MBRCRCS force_modules=usbhid quiet
initrd ramdisk_merged64.dat
initrd dat4.dat
boot

The files are stored on my tftp server.

And here is the boot in error : https://ibb.co/mHYdVQ7
Find all posts by this user
Quote this message in a reply
2019-05-15, 20:41
Post: #4
RE: acronis 2017 uefi
It might be a good idea to verify that the files are valid,
also test with imgstat and shell before boot - this will show the files downloaded, and their size, please verify that they are correct.

the kernel output shows us that it can't find any root fs - this means that something is wrong with the initrds, or how they are (not) found or parsed correctly by the kernel.

It might be worth a extra check to start the original in uefi mode, and do cat /proc/cmdline as was done to get that line in the documentation, just to be sure nothing is missed or changed in newer versions.

Use GitHub Discussions
VRAM bin
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)