Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
multiple initrd/imgfetch in UEFI mode
2015-10-09, 12:39
Post: #1
multiple initrd/imgfetch in UEFI mode
Hi,

I'm trying to upload multiple files from my iPXE script to get them during initrd.

It works fine in legacy mode, but I not in UEFI mode.

Code:
#!ipxe
  kernel http://my.web.server/boot/vmlinuz initrd=initrd.img
  initrd http://my.web.server/boot/initrd.img
  initrd http://my.web.server/boot/test.txt /tmp/test.txt
  boot

The file test.txt is correctly loaded (I have done an imgstat after the load) but can not be found under /tmp (neither anywhere) during the initrd phase. It works fine in legacy mode ...

Any advices ?

Note: It took me time to find that the kernel option initrd=<file> is compulsory in UEFI mode (not in legacy)

Thanks,

Simon.
Find all posts by this user
Quote this message in a reply
2015-10-22, 00:53
Post: #2
RE: multiple initrd/imgfetch in UEFI mode
(2015-10-09 12:39)simonb Wrote:  
Code:
#!ipxe
  kernel http://my.web.server/boot/vmlinuz initrd=initrd.img
  initrd http://my.web.server/boot/initrd.img
  initrd http://my.web.server/boot/test.txt /tmp/test.txt
  boot

The file test.txt is correctly loaded (I have done an imgstat after the load) but can not be found under /tmp (neither anywhere) during the initrd phase. It works fine in legacy mode ...

Any advices?

Note: It took me time to find that the kernel option initrd=<file> is compulsory in UEFI mode (not in legacy)

Not yet supported under UEFI, sorry. You can provide multiple initramfs CPIO archives via (from memory) multiple initrd= arguments on the kernel command line, but there's no capability to have iPXE automatically construct the CPIO headers for you (as is done under BIOS).

Michael
Visit this user's website Find all posts by this user
Quote this message in a reply
2015-10-22, 08:35 (This post was last modified: 2015-10-22 09:23 by simonb.)
Post: #3
RE: multiple initrd/imgfetch in UEFI mode
Thanks for your reply. It does work indeed with :

Code:
#!ipxe
  kernel http://my.web.server/boot/vmlinuz initrd=initrd.img initrd=test.cpio
  initrd http://my.web.server/boot/initrd.img
  initrd http://my.web.server/boot/test.cpio
  boot
with test.cpio created as :
Code:
find tmp
tmp
tmp/test.txt
Code:
find tmp |cpio --quiet --dereference -o -H newc > test.cpio
Thanks a lot.

Bertrand.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)