Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to set the DHCPv6 in win2012r2 to boot ipxe.efi
2016-06-04, 06:59
Post: #3
RE: How to set the DHCPv6 in win2012r2 to boot ipxe.efi
(2016-06-03 16:54)mcb30 Wrote:  
(2016-06-03 04:49)zerojay100 Wrote:  1. 2012R2 , WDS, DHCPv4 + V6
2. Boot to ipxe.efi with DHCPv4 UEFI is successful.(set DHCP option 67 = boot\x64\ipxe.efi)

My question is ----
How can I use the DHCP IPv6 service under 2012r2 to "set the boot file" as same as IPv4?

DHCPv6 uses a "boot URI" instead of a separate TFTP server IP address and filename. You should be able to just set this to any URI that iPXE understands.

Michael

Thanks a lot, Michael. But could you please specify the steps in 2012r2?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: How to set the DHCPv6 in win2012r2 to boot ipxe.efi - zerojay100 - 2016-06-04 06:59



User(s) browsing this thread: 1 Guest(s)