No drives available while booting
|
2016-11-30, 20:15
Post: #2
|
|||
|
|||
RE: No drives available while booting
(2016-11-30 12:13)myme3project@gmail.com Wrote: Hello Team, Do you get any error or what happens? what is the issue? I would strongly encourage you to not use pxelinux and instead load ipxe directly. for legacy this can be done by using undionly.kpxe, you will then want to read http://ipxe.org/howto/chainloading#break...inite_loop If you decide to use your dhcp server to break the loop you will want to remove the dhcp command from your script. The alternative to doing this on the DHCP server is to instead embed the script in the ipxe binary, this is explained at the above link. about your script for wimboot, first you should not need to specify any of the bootmgr options, and it seems you are missing the boot command in the file. Code: #!ipxe So the changes are: * let dhcp command auto detected devices. * use netX instead of net0 so the last found device is used. * add gui and pause options to wimboot * remove bootmgr and bootx64 files * add boot command at the end One other thing you might want to change is to use absolute http based paths instead, such as kernel http://server/ipxe/wimboot gui pause instead. I would recommend that you get this working in legacy bios mode first. When you have that going you can look into adding ipxe.efi or snponly.efi to your dhcp server instead, and when you have that it might actually just work. Use GitHub Discussions VRAM bin |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
No drives available while booting - myme3project@gmail.com - 2016-11-30, 12:13
RE: No drives available while booting - NiKiZe - 2016-11-30 20:15
RE: No drives available while booting - myme3project@gmail.com - 2016-12-01, 06:54
RE: No drives available while booting - NiKiZe - 2016-12-01, 23:28
|
User(s) browsing this thread: 1 Guest(s)