Hello !
On my desktop (which has 2 network interfaces, 1 intel and 1 atheros), I remain stuck on "ipxe initialising devices" on either of the network interfaces.
I don't have this problem on other computers or on virtual machines.
I tried at least 4 versions of ipxe but still the same problem.
Can you help me?
Thanks!
It is hard to help you without more information.
Please always include which iPXE binary you are using. (for example ipxe.efi, undionly.kpxe etc)
Also include pciids for the devices.
I use ipxe.efi.
Where do I find the "pciids"?
Thanks!
pciids are preferably found by using lspci -nn in linux
you could try snp.efi and see if it makes any difference, but you will probably have to dig into building ipxe.efi with some DEBUG= flags enabled to figure out why it hangs, not sure what at the moment since we don't know exactly which drivers are involved.
Why do you need the DEBUG= flags enabled for this btw, NiKiZe?
(2019-06-08 15:25)Naquin Wrote: [ -> ]Why do you need the DEBUG= flags enabled for this btw, NiKiZe?
With DEBUG flags, there will be more logs.
I was able to recover the pci :
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4)
00:1c.6 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 [8086:1e1c] (rev c4)
00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 [8086:1e1e] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller [8086:1e22] (rev 04)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280] [1002:679a]
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti HDMI Audio [Radeon HD 7870 XT / 7950/7970] [1002:aaa0]
03:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11)
04:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 30)
05:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0)
06:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
07:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11)
But I do not know what to do with it ...
For the debug flags, can you describe in detail how to proceed?
Thanks !
Cutting that down ...
(2019-06-10 15:15)bluedark Wrote: [ -> ]00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
06:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
But I do not know what to do with it ...
For the debug flags, can you describe in detail how to proceed?
Thanks !
Now we can check which drivers that relates to in iPXE, and from that decide suggested DEBUG flags, I don't have the time to dig into that right now tho, sorry, will try to get back to you ASAP
OK, thanks. I am waiting for your return. In the meantime, has anyone ever encountered this problem and may be able to help me?
Hello
could you study my driver problem?
Thanks!
Hello,
I solved my problem. I updated my bios with an earlier version and it works well now on the 2 network cards