2011-04-19, 09:38
Hello there,
I have a severe issue with HP NC7771 adapter. The ISCSI disk registers with bios, the boot starts, but it seems as the adapter is only running at 10 mbit. It's crawling - XP takes half an hour to boot, then it's fine. I have yet to measure disk speed (ISCSI disk that is) after boot, but first impressions are that system is up to speed.
It's not a SAN / Network problem, as I have other PCs running well. Btw. the SAN uses the same adapter.
I tried gPXE, iPXE iso, iPXE rom build and burned into NIC. Same effect.
Any ideas how to debug?
I have a severe issue with HP NC7771 adapter. The ISCSI disk registers with bios, the boot starts, but it seems as the adapter is only running at 10 mbit. It's crawling - XP takes half an hour to boot, then it's fine. I have yet to measure disk speed (ISCSI disk that is) after boot, but first impressions are that system is up to speed.
It's not a SAN / Network problem, as I have other PCs running well. Btw. the SAN uses the same adapter.
I tried gPXE, iPXE iso, iPXE rom build and burned into NIC. Same effect.
Any ideas how to debug?