+- iPXE discussion forum (https://forum.ipxe.org)
+-- Forum: iPXE user forums (/forumdisplay.php?fid=1)
+--- Forum: General (/forumdisplay.php?fid=2)
+--- Thread: iPXE session transfer issue with windows 2012 R2 (/showthread.php?tid=10045)
iPXE session transfer issue with windows 2012 R2 - shri - 2017-06-08 15:44
Hi All,
I was able to successfully remote boot server 2016 with ipxe, but facing issues with Server 2012 R2.
I've a locally installed Windows 2012 VM. I attached the windows boot disk to another VM and exported it using iscsi.
I'm trying to sanboot it on a diskless remote VM using iPXE.
AFAIK, please correct me if I'm wrong:
1) iPXE creates an initial session with ISCSI target.
2) The session details are later transferred by iPXE to OS using iBFT, and OS boots using same session
I observed this with server 2016. I could see 1 initial session for iPXE, then 2 sessions for a moment and later the first session disconnected.
With 2012 server I can see initial iPXE session being created but the next session is never created. Ultimately my boot fails
This is the script I'm using:
Code:
dhcp
set initiator-iqn <iqn-name>
set net0/gateway 0.0.0.0
sanboot iscsi:<iscsi ip>::::<iqn>Any ideas??
Thanks,
Shri