![]() |
[SYSLINUX] chain pxelinux (4.02) not working - Printable Version +- iPXE discussion forum (https://forum.ipxe.org) +-- Forum: iPXE user forums (/forumdisplay.php?fid=1) +--- Forum: General (/forumdisplay.php?fid=2) +--- Thread: [SYSLINUX] chain pxelinux (4.02) not working (/showthread.php?tid=1024) |
[SYSLINUX] chain pxelinux (4.02) not working - mymycracra - 2011-10-13 23:00 Hi everyone, I am just letting you know that the chainbooting with pxelinux from debian 'stable' (Version 4.02+dfsg-7) does not work. I using the pxe dispatcher with this version it doesn't work, with the use of syslinux from 'oldstable' (Version 3.71+dfsg-5) the chainbooting works. Any idea what could be the problem? Note: letting you know that gPXE 4.02 does work with syslinux 4.02 Regards, JM RE: [SYSLINUX] chain pxelinux (4.02) not working - robinsmidsrod - 2011-10-14 11:41 As far as I know, iPXE (and gPXE) doesn't support the COM32R modules in syslinux 4.x, the old COM32 modules should work. Are you trying to directly run a COM32R module? Your phrase "chainbooting with pxelinux FROM debian stable..." doesn't make sense. Do you mean TO, not FROM, here? Or do you mean that you used the pxelinux.0 included with Debian Stable to try and PXE boot something (maybe debian)? Your problems with the pxe dispatcher I've answered here, http://forum.ipxe.org/showthread.php?tid=3&pid=1276#pid1276. Please follow up on it there. RE: [SYSLINUX] chain pxelinux (4.02) not working - mymycracra - 2011-10-14 12:00 thanks for the reply, Quote:I am just letting you know that the chainbooting with pxelinux from debian 'stable' (Version 4.02+dfsg-7) does not work. I just meant that the dhcp server is a debian squeeze, and I am using the syslinux provided by debian. Here is the pxelinux.cfg: Code: default fai-generated I might not understand well, but there is not COM32 modules. And one quick question, does localboot should work because it doesn't: Code: default fai-generated RE: [SYSLINUX] chain pxelinux (4.02) not working - mymycracra - 2011-10-14 13:22 Ok, finally I found my error. I tried to add some stuff near: Code: sub no_params { And made a mistake. Sorry for the disturbance. Regards, JM |