+- iPXE discussion forum (https://forum.ipxe.org)
+-- Forum: iPXE user forums (/forumdisplay.php?fid=1)
+--- Forum: General (/forumdisplay.php?fid=2)
+--- Thread: HP DL380 Gen10 Error: 0xc0000001 (/showthread.php?tid=18377)
HP DL380 Gen10 Error: 0xc0000001 - dzeleski - 2019-06-01 00:55
I have other hardware booting with the exact same setup. We are using MDT and chaining directly to MDTs litetouchpe image. Specifically on these HP DL380 gen10 servers we get an error:
BlInitializeLibrary failed 0xc0000001
Whats interesting is that the output between this server and a working server are nearly the same minus the memory addresses. I tried injecting HPs drivers into the PE image and that did not work, tried different BCD files that also did not work, also tried using copype and using the files it created and that did not work. Out of ideas at this point and that error is pretty not helpful :/
Thanks!
![[Image: Uv9zjkd.png]](https://i.imgur.com/Uv9zjkd.png)
EDIT:
Using latest wimboot and latest ipxe
EDIT 2:
BCD looks like this:
Code:
PS D:\DeploymentShare\Boot\x64\Boot> bcdedit /store BCD /enum all
Windows Boot Manager
--------------------
identifier {bootmgr}
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {default}
displayorder {default}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
-------------------
identifier {default}
device ramdisk=[boot]\sources\boot.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
path \windows\system32\boot\winload.exe
description Windows Setup
locale en-US
inherit {bootloadersettings}
osdevice ramdisk=[boot]\sources\boot.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
systemroot \windows
custom:250000c2 1
detecthal Yes
winpe Yes
ems No
Windows Memory Tester
---------------------
identifier {memdiag}
device boot
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
EMS Settings
------------
identifier {emssettings}
bootems No
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}
Hypervisor Settings
-------------------
identifier {hypervisorsettings}
description Hypervisor Settings
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200
Device options
--------------
identifier {7619dcc8-fafe-11d9-b411-000476eba25f}
ramdisksdidevice boot
ramdisksdipath \boot\boot.sdi
PS D:\DeploymentShare\Boot\x64\Boot>ipxe script:
Code:
#!ipxe
kernel http://<url>/DeploymentShare/Boot/x64/Boot/wimboot
initrd http://<url>/DeploymentShare/Boot/x64/Boot/BCD BCD
initrd http://<url>/DeploymentShare/Boot/x64/Boot/boot.sdi boot.sdi
initrd -n boot.wim http://<url>/DeploymentShare/Boot/LiteTouchPE_x64.wim boot.wim
imgstat
bootRE: HP DL380 Gen10 Error: 0xc0000001 - NiKiZe - 2019-06-01 06:20
A quick google on that error yields: https://support.microsoft.com/en-us/help/4020050/blinitializelibrary-failed-xxx-error-when-you-install-or-start-an-oper
Try to upgrade firmware on the machine, if that dosn't help you should contact HP about this issue.
compiling ipxe with memmap debug enabled might help you see what is going on, but not sure what can be done to have that solved, other than fixing firmware.
RE: HP DL380 Gen10 Error: 0xc0000001 - MultimediaMan - 2019-06-01 16:07
HP Gen9 and Gen10 share the same firmware bugs. They are fixed in the latest releases.
RE: HP DL380 Gen10 Error: 0xc0000001 - dzeleski - 2019-06-03 17:25
(2019-06-01 16:07)MultimediaMan Wrote: HP Gen9 and Gen10 share the same firmware bugs. They are fixed in the latest releases.
Would you happen to know what version fixes it specifically?
RE: HP DL380 Gen10 Error: 0xc0000001 - dzeleski - 2019-06-03 19:11
Flashed latest from HP: U32 v2.04 (04/18/2019)
Still fails
, getting this fixed from HP will be a giant PITA.
RE: HP DL380 Gen10 Error: 0xc0000001 - NiKiZe - 2019-06-03 22:18
HP are actually quite good at dealing with these issues, have you contacted them?
I can guarantee you that it is harder for them to fix the issue, if they don't get your report.
building iPXE with DEBUG=memmap, might give you some idea of what is going on, and playing around with order of loading the files might help.
Also try to double check BIOS settings, maybe do a factory reset and try again and see if that changes anything.
RE: HP DL380 Gen10 Error: 0xc0000001 - dzeleski - 2019-06-19 19:23
(2019-06-03 22:18)NiKiZe Wrote: HP are actually quite good at dealing with these issues, have you contacted them?
I can guarantee you that it is harder for them to fix the issue, if they don't get your report.
building iPXE with DEBUG=memmap, might give you some idea of what is going on, and playing around with order of loading the files might help.
Also try to double check BIOS settings, maybe do a factory reset and try again and see if that changes anything.
Its not that they wont be helpful its just going to be a giant pain.
So I have been working with HP at this point and they are looking for those memmap dumps from iPXE. I tried compiling iPXE like this:
Code:
make bin-x86_64-efi/ipxe.efi EMBED=boot.ipxe DEBUG=memmapThat did not seem to change anything in the console output. Any ideas? Thanks again.
RE: HP DL380 Gen10 Error: 0xc0000001 - mhabets - 2019-07-05 10:46
From your earlier post it seem you go through a lot of steps before booting iPXE. These all fragment the memory.
You should try cutting out some steps, like grub. A braver option would be to burn iPXE directly on the card.