iPXE discussion forum
TINY PXE SERVER + SCCM Image - Printable Version

+- iPXE discussion forum (https://forum.ipxe.org)
+-- Forum: iPXE user forums (/forumdisplay.php?fid=1)
+--- Forum: General (/forumdisplay.php?fid=2)
+--- Thread: TINY PXE SERVER + SCCM Image (/showthread.php?tid=20812)



TINY PXE SERVER + SCCM Image - Qbeq - 2019-11-06 10:02

Hi Friends

I am going to configure TINY PXE server for SCCM image, purpose is to install windows 10 image via network, with out using SCCM server.
With the help of internet resources I have configured Tiny PXE server, PXE script, DHCP settings and was able to boot the image to a remote PC.
But at certain point while booting it is throwing this error message.
Here I am going to post few images so will be able to understand the scenario

This is the content of my SCCM image

[Image: 7.jpg]


PXE Script

[Image: Script.jpg]


Boot Screen

[Image: 4.jpg]


I have refereed this website and did the changes to the original boot.wim file by adding bootstrap.vbs and winpeshl.ini and other required changes as discribed.


But during the format process, it gives me this error

Error Message

[Image: 1.jpg]




please Advice on this
Appreciate your assistance
Thankyou


RE: TINY PXE SERVER + SCCM Image - NiKiZe - 2019-11-06 21:44

First of, if there is text, use text and avoid images, also use printscreens when possible and not images taken with a camare Wink

you should not include bootmgr files, so remove the initrd lines for those.
Not sure why you have 2 identical sections for in you ipxe script?


RE: TINY PXE SERVER + SCCM Image - Qbeq - 2019-11-20 09:17

(2019-11-06 21:44)NiKiZe Wrote:  First of, if there is text, use text and avoid images, also use printscreens when possible and not images taken with a camare Wink

you should not include bootmgr files, so remove the initrd lines for those.
Not sure why you have 2 identical sections for in you ipxe script?


Hello
Thanks for the advice & reply
Here, few images are screenshots, but rest taken from camera, because I am not aware of a program that can take print screen during boot screen.

So your advice is to remove Bootmgr line ?? is it ?
actually it is not identical, if you carefully see the script, it is pointing to two different folders.

And one more thing, may I know that things need to update in the original BOOT.wim file ???


RE: TINY PXE SERVER + SCCM Image - NiKiZe - 2019-11-25 23:23

remove bootmgr and any other .efi references
why would you need to modify boot.wim?