![]() |
Should IPv6 work with undionly? - Printable Version +- iPXE discussion forum (https://forum.ipxe.org) +-- Forum: iPXE user forums (/forumdisplay.php?fid=1) +--- Forum: General (/forumdisplay.php?fid=2) +--- Thread: Should IPv6 work with undionly? (/showthread.php?tid=21799) |
Should IPv6 work with undionly? - myxal - 2020-02-03 10:02 Hello. Should IPv6 work with undionly iPXE images (BIOS, UEFI)? I thought I'd try out netboot.xyz in my dual-stack network by just putting its entry into existing menu, and unfortunately didn't get very far - iPXE keeps reporting "Connection timed out" on the very first IPv6 download - https://boot.netboot.xyz Digging deeper with tcpdump and Wireshark, it seems undionly iPXE doesn't respond to Neighbor Solicitation at all. If, by sheer luck, the client's LLA was in the router's table from when it was used by a full OS, but GUA wasn't, I'd see how the HTTPS request went out, the response came back on the WAN interface, but nothing was forwarded into LAN. The neighbor table entries for the client during this ordeal were in the router (Linux machine) marked as INCOMPLETE or FAILED. The iPXE image is an undionly.kpxe or .efi provided by Ubuntu 19.10, underlying firmware is a Marvell Yukon PXE (BIOS) and Intel PXE w/vmWare (UEFI) RE: Should IPv6 work with undionly? - myxal - 2020-02-04 10:16 Whoops, never mind the UNDI vs NIC-specific distinction. The test with netboot.xyz's ipxe build happened in another network (I tried it in my network later yesterday and it failed much like the UNDI build.) It turns out my network where I observed the issues has one, or perhaps several problems with some IPv6 packets not reaching where they're supposed to reach (vmWare Fusion bug, perhaps?). RE: Should IPv6 work with undionly? - myxal - 2020-02-08 14:17 Forum ate my post (ironically, it's broken for IPv6). TL;DR: Yes it should, likely an issue with firewall and/or bridge. |