+- iPXE discussion forum (https://forum.ipxe.org)
+-- Forum: iPXE user forums (/forumdisplay.php?fid=1)
+--- Forum: General (/forumdisplay.php?fid=2)
+--- Thread: ipxe/memdisk/http iso - Only rebooting (/showthread.php?tid=7206)
ipxe/memdisk/http iso - Only rebooting - martysmarty - 2014-02-14 14:21
Hi guys,
I'm hoping someone can help me with an issue..
I'm using a usb drive to boot into syslinux. From there I can boot multiple ISO files from the USB correctly using memdisk
However, I also have some ISO's online. So I let syslinux boot into ipxe, it gets dhcp address, it downloads the files, and than, it just reboots. FOr about half a second there is some text scrolling, but to short to read anything.
I've tried several methodes of booting, but all have the same issue, on multiple PC's.
The code used:
#!ipxe
dhcp
initrd http://.../linux/debian-live-7.1-amd64-standard.iso
chain http://.../memdisk iso raw
Has anybody seen this before, or have a possible solution?
RE: ipxe/memdisk/http iso - Only rebooting - robinsmidsrod - 2014-02-20 09:31
I would recommend that you build with serial or syslog debugging to see if you're able to figure out what (if any) error message is displayed before the reboot. See http://ipxe.org/console for more details on how.