iPXE discussion forum
Issues with Autoboot - Printable Version

+- iPXE discussion forum (https://forum.ipxe.org)
+-- Forum: iPXE user forums (/forumdisplay.php?fid=1)
+--- Forum: General (/forumdisplay.php?fid=2)
+--- Thread: Issues with Autoboot (/showthread.php?tid=7992)

Issues with Autoboot - bhupesh.bansal - 2016-03-18 20:01

I am trying autoboot command and getting following failure.

autoboot is working fine 3-4 time (Each time I pressed Ctrl +c during copy operation , started "autoboot net1" to restart the operation) and after that, its giving following error.

How Can I debug this issue.

iPXE> autoboot net1
net1: 00:22:12:df:ff:37 using dh8900cc on PCI0f:00.2 (open)
[Link:up, TX:880268 TXE:26 RX:885485 RXE:338]
[TXE: 15 x "Operation canceled (http://ipxe.org/0b086095)"]
[TXE: 11 x "Error 0x2a654089 (http://ipxe.org/2a654089)"]
[RXE: 182 x "The socket is not connected (http://ipxe.org/380f6093)"]
[RXE: 122 x "Operation not supported (http://ipxe.org/3c086083)"]
[RXE: 1 x "The socket is not connected (http://ipxe.org/380a6093)"]
[RXE: 18 x "Error 0x440e6083 (http://ipxe.org/440e6083)"]
Configuring (net1 00:22:12:df:ff:37).................. ok
net0: fe80::222:12ff:fedf:ff36/64 (inaccessible)
net0: 2001:db8:185::/48 gw fe80::213:5fff:fe21:d74a (no address) (inaccessible)
net1: gw
net1: fe80::222:12ff:fedf:ff37/64
net2: fe80::222:12ff:fedf:ff38/64 (inaccessible)
net3: fe80::222:12ff:fedf:ff39/64 (inaccessible)
Next server:
Filename: Connection timed out (http://ipxe.org/4c0a6092)