+- iPXE discussion forum (https://forum.ipxe.org)
+-- Forum: iPXE user forums (/forumdisplay.php?fid=1)
+--- Forum: General (/forumdisplay.php?fid=2)
+--- Thread: ProLiant BL460c Gen9 with UEFI Hang (/showthread.php?tid=8224)
ProLiant BL460c Gen9 with UEFI Hang - jlassign - 2016-11-14 14:07
I encountered a problem to boot a ProLiant BL460c Gen9 with UEFI. The kernel and initrd has been downloaded but nothing happens after.
The server seems to be frozen. The ipxe version is ipxe-b991c67 same issue with ipxe-aa11f5d.
Can you help me to investigate this issue ? or a way to search. There is no error.
client ipxe
iPXE 1.0.0+ -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP TFTP EFI Menu
net4: 5c:b9:01
c:ec:70 using NII on NII-0000:06:00.0 (open)[Link:down, TX:0 TXE:0 RX:0 RXE:0]
[Link status: Unknown (http://ipxe.org/1a086194)]
Configuring (net4 5c:b9:01
c:ec:70)...... oknet4: 10.128.21.10/255.255.255.0
Next server: 10.128.21.1
Filename: http://10.128.21.1/TEST/menuefi.ipxe
http://10.128.21.1/TEST/menuefi.ipxe... ok
menuefi.ipxe : 1086 bytes [script]
Launching Update firmwares HP-Gen8 in AUTOMATIC-MODE (BaseLine PSA 17.04.2014)
http://10.128.21.1/TEST/vmlinuz-3.12.49-11-default... ok
http://10.128.21.1/TEST/initrd-3.12.49-11-default... ok
server ipxe
linux-ze7p:/srv/www/htdocs/TEST # ls -l
total 1292716
-rw-r--r-- 1 root root 16283458 Nov 7 2016 initrd-3.12.49-11-default
-rw-r--r-- 1 root root 1053 Nov 8 2016 menu.ipxe
-rw-r--r-- 1 root root 1086 May 14 04:49 menuefi.ipxe
-rw-r--r-- 1 root root 1302478848 Nov 13 2016 squashfs.img
-rw-r--r-- 1 root root 4963792 Oct 3 2016 vmlinuz-3.12.49-11-default
linux-ze7p:/srv/www/htdocs/TEST #
linux-ze7p:/srv/www/htdocs/TEST # cat menuefi.ipxe
#!ipxe
# Variables are specified in boot.ipxe.cfg
# Some menu defaults
set menu-timeout 5000
set submenu-timeout ${menu-timeout}
isset ${menu-default} || set menu-default exit
set menu_auto Update firmwares HP-Gen8 in AUTOMATIC-MODE (BaseLine PSA 17.04.2014)
set menu_inter Update firmwares HP-Gen8 in INTERACTIVE-MODE
set menu_tools TOOLS (BootUTIL_1.4.83, CONREP 4.0.0.0, STRESS_1.04, SHELL, Reboot)
set webserver http://10.128.21.1/TEST
############ MAIN MENU ITEMS ############
echo Launching ${menu_auto}
kernel ${webserver}/vmlinuz-3.12.49-11-default initrd=initrd-3.12.49-11-default biosdevname=1 rd.vconsole.keymap=fr rd.debug rd.shell root=live:${webserver}/squashfs.img ip=${net4/ip:ipv4}:::${net4/netmask:ipv4}::em1:none rd.live.overlay.size=4096 console=ttyS0,19200n8
initrd ${webserver}/initrd-3.12.49-11-default
boot || goto failed
goto start
linux-ze7p:/srv/www/htdocs/TEST #
RE: ProLiant BL460c Gen9 with UEFI Hang - NiKiZe - 2016-11-14 23:59
The kernel should indeed boot, but in efi mode you will likely get an issue with the initrd, see here: http://forum.ipxe.org/showthread.php?tid=7756&pid=11699#pid11699
can you boot just the kernel without initrd (and without any other boot options)
can I suggest that you try a known working solution, you could try with for example chain http://b800.org/sysr/sysrcd.ipxe
just to see that the hw is working properly.
Also there have been several reports with issues on HP Servers, a firmware upgrade (which it seems you are trying to do) might actually be what is need to get efi pxe boot to a working state. :/