iPXE discussion forum / iPXE user forums / General v / Using 31-Bit Prefixes as bitmask

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using 31-Bit Prefixes as bitmask
2018-05-21, 14:35
Post: #1
mohammedt@mellanox.com Offline
iPXE User
**
 		Posts: 1
Joined: 2018-May
Reputation: 0
Using 31-Bit Prefixes as bitmask
Hi all.
is ipxe support in Using 31-Bit Prefixes on IPv4 Point-to-Point Links ?
i have a problem when using 31/ netmask for example :
host :
ip:1.1.1.0 netmask : 255.255.255.254

server :
ip 1.1.1.1 netmask : 255.255.255.254

the ipxe send to request to the server ( ip "1.1.1.1" ) as broadcast address so for this reason the server don't reply to ipxe request .
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication