efi booting problem
|
2016-08-10, 11:05
(This post was last modified: 2016-08-23 01:56 by hohoajoma.)
Post: #1
|
|||
|
|||
efi booting problem
hi everyone..
I try to boot using ipxe.efi for efi mode. The boot in VMWare works properly, but not working properly in real PC (DELL). i used ipxe.efi file : make bin-x86_64-efi/ipxe.efi DEBUG=efi_driver when I used snponly.efi :make bin-x86-64/snponly.efi ,too. PC: Dell OptiPlex 3010 NIC: rtl8168 message: iPXE initialising devices.. EFIDRV connecting our drivers EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) has driver "PCI" EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) disconnecting existing drivers EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0) has driver "NII" EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0) DRIVER_START EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0) is not supported by driver "PCI": Error 0x7f10e183 (http://tpxe.org/7f10e183) EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv4(0,0,0,0) has driver "SNP" EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv4(0,0,0,0) DRIVER_START EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv4(0,0,0,0) is not supported by driver "PCI": Error 0x7f10e183 (http://tpxe.org/7f10e183) EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv4(0,0,0,0) is not supported by driver "NII": Error 0x7f10e183 (http://tpxe.org/7f10e183) EFIDRV UNKNOEN<0xd0a0d398> could not start driver "SNP": Error 0x7f45e082 (http://tpxe.org/7f45e082) EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv6(0000:0000:0000:0000:0000:0000:0000:0000) has driver "SNP" EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv6(0000:0000:0000:0000:0000:0000:0000:0000) DRIVER_START EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv6(0000:0000:0000:0000:0000:0000:0000:0000) is not supported by driver "PCI": Error 0x7f10e183 (http://tpxe.org/7f10e183) EFIDRV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv6(0000:0000:0000:0000:0000:0000:0000:0000) is not supported by driver "NII": Error 0x7f10e183 (http://tpxe.org/7f10e183) EFIDRV UNKNOEN<0xd0a0d398> could not start driver "SNP": Error 0x7f45e082 (http://tpxe.org/7f45e082) And those messages are repeated. If anyone know this problem, help me. |
|||
2016-08-22, 09:47
Post: #2
|
|||
|
|||
RE: efi booting problem
The bios network device path of VMWare is set PciRoot(0x0)/Pci(0x11,0x0)/Pci(0x1,0x0)/MAC(000C29616B54,0x1)
But Dell Pc is set PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv4(0,0,0,0) The efi_child_add function in efi_utils.c is failed. DBG message is "EFIDEV PciRoot (0x0)/Pci (0x1c,0x4)/Pci(0x0,0x0) /MAC (c81f6625e234,0x0)/IPv4(0,0,0,0) could not add child". I think it seems to be because it contains an ip address after the device path. How should I solve this problem? |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)