Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fail to network boot FreeBSD installer EFI firmware
2019-11-18, 03:37
Post: #1
Fail to network boot FreeBSD installer EFI firmware
I am using a motherboard with UEFI firmware. I attempt to boot to FreeBSD installer from network but fail to do so.

My iPXE setup is working, I can boot to iPXE shell on the PC.

I have NFS root-path setup in dhcp

192.168.4.2/freebsd-12.1

When I try

chain http://192.168.4.2/freebsd-12.1/boot/loader.efi

I can boot to iPXE, and loading the loader.efi firmware, but it stop at

Setting currdev to net1:
Find all posts by this user
Quote this message in a reply
2019-11-18, 18:07
Post: #2
RE: Fail to network boot FreeBSD installer EFI firmware
Can we see your boot script?

"Thus far, you have been adrift within the sheltered harbor of my patience..."
Find all posts by this user
Quote this message in a reply
2019-11-19, 01:58
Post: #3
RE: Fail to network boot FreeBSD installer EFI firmware
This is the script:

Code:
set root-path 192.168.4.2:/mnt/tank/tftproot/freebsd-13.0
set dhcp.root-path 192.168.4.2:/mnt/tank/tftproot/freebsd-13.0
chain http://192.168.4.2/freebsd-13.0/boot/loader.efi || goto failed
Find all posts by this user
Quote this message in a reply
2019-11-19, 16:33 (This post was last modified: 2019-11-19 16:37 by MultimediaMan.)
Post: #4
RE: Fail to network boot FreeBSD installer EFI firmware
(2019-11-19 01:58)ccy Wrote:  This is the script:

Code:
set root-path 192.168.4.2:/mnt/tank/tftproot/freebsd-13.0
set dhcp.root-path 192.168.4.2:/mnt/tank/tftproot/freebsd-13.0
chain http://192.168.4.2/freebsd-13.0/boot/loader.efi || goto failed

OK, I see what you have... Try this:

Code:
set root-path http://192.168.4.2/freebsd-13.0/
set dhcp.root-path http://192.168.4.2/freebsd-13.0/
chain http://192.168.4.2/freebsd-13.0/boot/loader.efi BSDINSTALL_DISTSITE=http://192.168.4.2/freebsd-13.0 || goto failed

"Thus far, you have been adrift within the sheltered harbor of my patience..."
Find all posts by this user
Quote this message in a reply
2019-11-20, 04:34
Post: #5
RE: Fail to network boot FreeBSD installer EFI firmware
Code:
set root-path http://192.168.4.2/freebsd-13.0/
set dhcp.root-path http://192.168.4.2/freebsd-13.0/
chain http://192.168.4.2/freebsd-13.0/boot/loader.efi BSDINSTALL_DISTSITE=http://192.168.4.2/freebsd-13.0 || goto failed

I have tried the script, but no luck, same error happen.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 4 Guest(s)