Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Intel Gigabit CT Desktop Adapter (EXPI9301CTBLK)
2018-02-17, 12:49
Post: #1
Intel Gigabit CT Desktop Adapter (EXPI9301CTBLK)
Hello,
I have a network adapter "EXPI9301CTBLK", which I wanted to flash now.
I have entered the following commands "BootUtil -SAVEIMAGE -FILE = Backup.FLB" and "BootUtil -FE -ALL". Then I wanted to flash the new firmware with "BootUtil -UP = EFI -ALL-FILE = BOOTIMG.FLB".
Unfortunately, something went wrong.
First came a message that the Nic can not be initialized.
And now the adapter is no longer recognized, so I can not flash back.
Is the adapter still somehow save?

Please excuse my bad English, I write with translator.

Thanks in advance.
Find all posts by this user
Quote this message in a reply
2018-05-04, 07:48
Post: #2
RE: Intel Gigabit CT Desktop Adapter (EXPI9301CTBLK)
Usually, a bad flash doesn't render a NIC impossible to reflash. It is unusable for network booting, but it most likely works in an operating system, unless the flashed firmware contains some information the hardware needs to perform basic operations (Broadcom NICs come to mind).

I would carefully check that you have the latest firmware downloaded from the manufacturer's website, verify the md5sum of the files to ensure you don't have a corrupted download and follow the documentation to update the firmware. This is not an iPXE issue, as far as I can tell. Good luck!
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)