Issue with Intel UNDI, PXE-2.1 (build 083) @ Realtek PCIe GBE v2.31 @ Asus P7H55-M LX

[Santana]

(2014-06-17 15:38)mcb30 Wrote:  Could you try using undionly.kkpxe instead of undionly.kpxe? This will bypass some of the shutdown and reinitialisation calls, which might make a difference.

I tried and everything works fine with unidonly.kkpxe:

Code:

PXE->EB: !PXE at 9B3A:0070, entry point at 9B3A:0109
         UNDI code segment 9B3A:2C5C, data segment 8D6C:DCE0 (565-632kB)
         UNDI device is PCI 01:00.0, type DIX+802.3
         525kB free base memory after PXE unload
iPXE initialising devices...UNDINIC 0x19ef4 using UNDI 0x871b65d4
UNDINIC 0x19ef4 has MAC address bc:ae:c5:8f:89:e2 and IRQ 5
UNDINIC 0x19ef4 has type DIX+802.3, speed 10000000, flags 00001c1b
UNDINIC 0x19ef4 using interrupt mode
UNDINIC 0x19ef4 added
ok



iPXE 1.0.0+ (1639) -- Open Source Network Boot Firmware -- http://ipxe.org

I've got several of these boards and all show the same behavior.

Thank you for your time and efforts!