iPXE discussion forum / iPXE user forums / General v / HP Gen8 fail to boot winpe by ipxe

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HP Gen8 fail to boot winpe by ipxe
2014-11-14, 04:40
Post: #15
zhang_liang Offline
iPXE User
**
 		Posts: 10
Joined: 2013-Nov
Reputation: 0
RE: HP Gen8 fail to boot winpe by ipxe
This problem is solved after HP nic firmware upgraded.

ProLiant DL380p Gen8
HP EtherNet 1Gb 4-port 331FLR Adapter
Bootcode update to 1.38 from 1.31
PXE update to 16.6.0 from 15.4.2

Then， using latest wimboot(2.4.0), ipxe boot winpe for this HPGen8 server successfully.

In our case, we use two kinds of HP server below:
ProLiant DL360e Gen8
ProLiant DL380p Gen8
Both could be boot winpe by ipxe with latest winboot(>2.4.0).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP Gen8 fail to boot winpe by ipxe - zhang_liang - 2014-11-14 04:40



User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication