ipxe in constant loop

[louisg]

This forum is not accepting my .jpg. This is what I see: After IPXE initialising devices...ok it starts over, IPXE 1.0.0+ .....
Over and over. I will try to embed the script to see what happens.

---------------------------
>>Checking Media Presence......
>>Media Present......
Downloading NBP file...

Succeed to download NBP file.
iPXE initialising devices...ok


IPXE 1.0.0+ (309c50) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP NFS TFTP EFI Menu

net0: b8:ae:ed:73:6f:9b using i218v-3 on PCI00:19.0 (open)
[LINK:up, TX:0 TXE:0 RX:0 RXE:0]
Configuring (net0 b8:ae:ed:73:6f:9b)... ok
net0: 192.168.0.96/255.255.255.0 gw 192.168.0.1
Next server: 192.168.0.5
Filename: ipxe.efi
tftp://192.168.0.5/ipxe.efi... ok
ipxe.efi : 863360 bytes [EFI]
iPXE initialising devices... ok


IPXE 1.0.0+ (309c50) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP NFS TFTP EFI Menu

net0: b8:ae:ed:73:6f:9b using i218v-3 on PCI00:19.0 (open)
[LINK:up, TX:0 TXE:0 RX:0 RXE:0]
Configuring (net0 b8:ae:ed:73:6f:9b)... ok
net0: 192.168.0.96/255.255.255.0 gw 192.168.0.1
Next server: 192.168.0.5
Filename: ipxe.efi
tftp://192.168.0.5/ipxe.efi... ok
ipxe.efi : 863360 bytes [EFI]
iPXE initialising devices... ok
--------------------------------

make bin-x86_64-efi/ipxe.efi DEBUG=efi_autoboot gave this in red:

EFI found autoboot link-layer address:
00000000 : b8 ae ed 73 6f 9b : ...so.

---

With embed.ipxe script:

#ipxe
shell

after iniialising devices...ok

I get a movable mouse pointer and a unflashing cursor in the top left but I can not type anything.