HP Service Pack for Proliant (Firmware)

[markyang]

(2014-08-28 13:07)odenbach Wrote:  Hi,

the problem is within the SPP, not within iPXE. The SPP is missing some kernel modules which are needed for CIFS. NFS works.

If you need CIFS, you will have to add the missing modules

md5.ko
md4.ko
ecb.ko
des_generic.ko

to the initrd. Remember that the modules must match the kernel version from the SPP.

Or just take my patched version:

http://homepages.uni-paderborn.de/odenba...initrd.img

(works with SPP 2014-06-0)

Regards,

Christopher

Hi

I am in the same situation but trying to boot the ISO over http

I have tried:
:HP
kernel ${base-url}/mirrors/hp-boot/vmlinuz
initrd ${base-url}/mirrors/hp-boot/initrd.img media=network rw root=/dev/ram0 ramdisk_size=808296 init=/bin/init loglevel=3 ide=nodma ide=noraid nopat pnpbios=off vga=791 splash=silent hp_fibre showopts noexec32=off numa=off nox2apic TYPE=AUTOMATIC AUTOPOWEROFFONSUCCESS=no AUTOREBOOTONSUCCESS=no iso1=${base-url}/mirrors/hp-boot/SPP2016040.2016_0317.20.iso iso1mnt=/mnt/bootdevice
boot

and

:HP
sanboot ${base-url}/mirrors/hp-boot/SPP2016040.2016_0317.20.iso
boot

These both don't work.

has anyone managed to get the HP Service pack to work with ipxe and over http?