error 38086101 and spanning tree/port-fast

[harry88]

(2015-06-02 23:51)NiKiZe Wrote:  

(2015-05-27 18:10)shchoi Wrote:  I am hoping this makes sense and if it does I'm hoping someone can look into this and maybe add a simple sleep command for about 2 seconds before ipxe checks for link on network interfaces. Thanks.

Adding a 2 sec delay after each link up in ipxe would be unacceptable for many users, especially if this only affects STP enabled ports.

Which version of iPXE are you running (the xxxp part of "1.0.0+ (xxxx)") which NIC, and which kind of ipxe binary (example: ipxe.pxe, undionly.kpxe etc)

Hi, I am new to setting up ipxe and ubuntu. Where would I edit the 2 second delay? I have the same problem and also from another thread where it happens only once out of 4-5 tries. I would need to hard reboot the pc for it to work. Thanks in advance.
Im running ipxe 1.0.0+ (53653) if that helps. I'm trying to set up the Fog Project on 14.04 LTS ubuntu. with dell 9020's. I am running the dhcp proxy with dnsmasq.
Its runs more that half the time, just once in every 4-5 reboots I get it says its down (not failed) with 38086101 message.