IPXE Wimboot UEFI

[power270]

(2016-08-03 18:09)sebus Wrote:  I now need to make ipxe.efi boot from MS DHCP Windows Server 2012 R2

Followed this - https://wiki.fogproject.org/wiki/index.p...-Existence
but so far the EFI IPv4 network boot did not want to pickup the specified (option 67) ipxe.efi - more tests needed

I followed a similar guide and I have this working for EFI X86, EFI X64 and BIOS. I use Tiny PXE server instead of WDS.

You could use IPHELPER on your switch with Tiny PXE Server running in proxydhcp mode. With this config, the architecture is passed to the PXE server and it serves the proper file automatically.