UEFI 10G Intel X710/XL710 Hang Windows Splash Screen

[NiKiZe]

(2016-10-26 23:44)renato Wrote:  OK, tested the same system but with another 10G intel card X540I350, same system, same dhcp/ipxe configuration and it does NOT hang, it boots normally!!!!!.

O_o, What does it mean?

Ok so XL710 related, could you boot the wim by putting it on usb driver, replacing the original boot.wim so that you can boot without involving ipxe at all. To me a hang in winpe booting is still a windows driver issue, not ipxe/wimboot related.

(2016-10-26 23:44)renato Wrote:  there is no support for .ISO booting under UEFI mode, right? wanted to see if this is a wimboot or iPXE/driver issue.

No sanboot support in efi mode yet.

If you could post some info just to be sure.

your ipxe script for booting.
output from imgstat before boot line in that script

and output of what you get when starting wimboot with pause.

So output from a script like this:

Code:

kernel wimboot gui pause
initrd.....
imgstat
pause
boot

EDIT: efi sanboot seems to have been implemented in: https://git.ipxe.org/ipxe.git/commitdiff...25c2c2f5ad different forum post about this: http://forum.ipxe.org/showthread.php?tid=6896