UEFI 10G Intel X710/XL710 Hang Windows Splash Screen

[renato]

(2016-10-27 07:34)NiKiZe Wrote:  Ok so XL710 related, could you boot the wim by putting it on usb driver, replacing the original boot.wim so that you can boot without involving ipxe at all. To me a hang in winpe booting is still a windows driver issue, not ipxe/wimboot related.

OK, Tested with a USB, all I did was to put the contents of the folder "winboot" (see below) in the USB. It booted without problem in UEFI Mode, I did not check it in BIOS mode but it boots fine using PXE/iPXE and BIOS.

(2016-10-27 07:34)NiKiZe Wrote:  If you could post some info just to be sure.

your ipxe script for booting.

there are two parts, the following is the embeded script

Code:

dhcp
chain http://${next-server}/pxefiles/lboot.php?MAC=${mac}&DID=${product}

and the following is the answer to the lboot.php script

Code:

#!ipxe
kernel wimboot
initrd winboot/bootmgr.exe                     bootmgr.exe
initrd winboot/boot/bcd                    bcd
initrd winboot/boot/boot.sdi               boot.sdi
initrd winboot/sources/boot.wim            boot.wim
boot

The bootmgr is replaced by wimboot automatically

(2016-10-27 07:34)NiKiZe Wrote:  output from imgstat before boot line in that script

and output of what you get when starting wimboot with pause.

So output from a script like this:

Code:

kernel wimboot gui pause
initrd.....
imgstat
pause
boot

Here is a picture of the output: https://drive.google.com/file/d/0B-ZdAQk...sp=sharing