Disable Network interface

[iNeedHelp]

(2016-11-02 11:30)robinsmidsrod Wrote:  A simple solution is to use undionly.kpxe instead of ipxe.pxe (because it will only ever initialize a single NIC, the one you chainloaded from), or alternatively an embedded script that directly uses net3. There are also some references to embedded scripts with NIC selection menu over on http://ipxe.org/examples which you'll hopefully figure out a solution with.

Thank you for the help, i forgot to mention that we use ipxe from a usb stick, because
our PCs are not able to boot from network natively.

The problem was solved very easily, first write a simple ipxe script:

Code:

#!ipxe

autoboot net2

and then build the ipxe usb stick with the embedded script:

Code:

make EMBED=boot_net2.ipxe