iMAC with Broadcom 14e4-1686 BCM57766 : link status down

[marcolefo]

Hi ! Thanks for your help.

(2017-01-18 21:13)NiKiZe Wrote:  The driver says the link is down.
To debug this you could try and build ipxe from current git master with

Code:

make bin-x86_64-efi/ipxe.efi DEBUG=tg3

this should give you some status information that will be a start for us to help you figure out what the issue is and hopefully fix it.

I have tried three debug mode : tg3 tg3:3 and tg3:4
tg3 only says nothing more.
Here are the results for the two other mode:
https://youtu.be/rvjjC_ZHtw8
https://youtu.be/vPOcXwJUikU

Quote:one other thing to test is to try and use snp.efi instead, which will default to the snp or nii driver provided by the firmware, this is in no way a fix but rather a possible debug step to ensure everything else is working as expected.

With the snp.efi, provided by FOG :

Code:

Configuring (net0 38:c9:86:12:xx:xx)..............No configuration method succeeded (http://ipxe.org/040ee186)