iMAC with Broadcom 14e4-1686 BCM57766 : link status down

[marcolefo]

(2017-02-13 18:35)NiKiZe Wrote:  Might be a notorious EFI bug, you can press ESC followed by b to emulate ctrl-b

Yes, that's work, thanks .

So, dhcp followed by ifstat :

(2017-02-13 18:35)NiKiZe Wrote:  Also note that you can't have a embeded script, since that disables the default prompt, if it still does not work you can add a embedded script with just shell to get into the shell.

So for this case lets go with: testscript.ipxe

Code:

#!ipxe
dhcp
ifstat
shell

build with

Code:

make bin-x86_64-efi/tg3.efi EMBED=testscript.ipxe

and test the resulting bin-x86_64-efi/tg3.efi

Maybe it's a clue : I've tried that and I never go to the shell.

(2017-02-13 18:35)NiKiZe Wrote:  After uploading an image of running with the above embeded script without debug, please also build and do the same with

Code:

make bin-x86_64-efi/tg3.efi DEBUG=tg3,tg3_hw,tg3_phy EMBED=testscript.ipxe

Here is the video of the boot :
https://youtu.be/dZJCd0R7ZG8


Thanks for your help.