wimboot - sccm tsbootshell.exe

[muzz]

Hi There,

So I am using wimboot with a boot image created on our SCCM environment, and this boots successfully using wimboot within ipxe from either a traditional BIOS environment or a UEFI environment.

the boot image itself has all the required drivers for the hardware I am using, so nics and disks are present and I can see these by doing an ipconfig or diskpart

it seems that tsbootshell.exe is having a bit of a problem in that smsts is logging multiple entries for boot wim. from the UI, it appears to hang on a dialogue for initialising hardware devices.. and then eventually prompts to restart with a "Unable to read task sequence configuration disk" this is usually attributed to missing drivers from the boot wim.

the smsts.log is reporting the following:
<![LOG[ConvertBootToLogicalPath failed to convert 'MULTI(0)DISK(0)RDISK(1)PARTITION(1)\SOURCES\BOOT.WIM (0x80070003)

I'm happy with the boot image because if I chainload the WDS/SCCM and have this image served up by TFTP, this runs successfully.

Any ideas as to what could be the cause?

Regards

Muzz