Lenovo Thinksystem ST550

[rweisman]

(2018-03-13 19:43)NiKiZe Wrote:  What command did you use to build iPXE?
AFAIK there is no debug.efi target so must be something else
Also quite sure there is no native driver for the X7xx series from Intel in iPXE please correct me if I'm wrong.
So best thing to try might be snponly.efi instead

Sorry.. I built the debug.efi using the following script, I called debug.ipxe
#!ipxe
dhcp
shell

I then run make bin-x86_64-efi/ipxe.efi EMBED=debug.ipxe
Finally I copy bin-x86_64-efi/ipxe.efi to debug.efi in my tftproot.

This has worked on most hardware, until today. So I suspect a network driver issue.

I would attached a screen shot.. but seems to not like my file. I'll try in a sep. Post


Thanks

Randy

---

I used the snponly and all works now. Thanks for pointing me in the correct direction.

Randy

---

I used the snponly and all works now. Thanks for pointing me in the correct direction.

Randy