QLogic\BMC 57810 driver issues

[NiKiZe]

(2018-10-19 00:48)bishop Wrote:  Both servers are HP DL380p GEN8, both nics have chip listed as undipci in the config output. The PCI ID is 14e4-168e. Which is not listed in the HW list.

When you run it in undi mode, it by (the PXE) design should only be able to use one nic (the one undionly.kpxe was loaded via)

To have full support you need native iPXE driver, or switching to EFI could also be an option.
One warning tho, there is several issues with those Broadcom nics, so I would say that you are kind of lucky to have one working