HP laptop hanging at iPXE initialising devices...

[ndogmail]

Hi All

Just compiled a fresh iPXE from scratch today using the git repository. Am using the undionly.kpxe and is working fantastic. I am using it to boot macbooks and macbook pros into our clonezilla PXE menu and imaging them over the network. Have tested in our building with a few acer servers and other machines which is working great.

One machine in particular is a HP laptop which gets stuck at the iPXE intialising devices. So far have not been able to get it booting with iPXE. If I want to boot it I use the gpxe undionly.kpe, which is working from it. However gpxe does not work with macbooks, so I have to keep changing back and forth.

Any chance you may take a look? Thanks. Would love to use iPXE only if possible.


Laptop: HP G42

Network card details: (from hdt)
Realtek Semiconductor Co., Ltd
RTL8101E/RTL8102E PCI Express Fast Ethernet controller
PCI ID: 10ec:8136[103c:1426]

Error message:
Intel UNDI, PE-2.1 (build 083)
Copyright © 1997-2000 Intel Corporation
All rights reserved.

Patents blah blah ...

Realtek PCIe FE Family Controller Series v1.19 (08/10/09)

PXE->EB: !PXE at 9A7E:0070, entry point at 9A7E:0109
UNDI code segment 9A7E:1704, data segment 8CAC:DD20 (562-624kB)
UNDI device is PCI 03:00,0, type DIX+802.3
562kB free base memory after PXE unload
iPXE initialising devices...