iPXE discussion forum / iPXE user forums / General v / Why Esxi 6.5 or 6.7 fail to start setup GUI via iPXE

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Why Esxi 6.5 or 6.7 fail to start setup GUI via iPXE
2019-12-10, 04:03
Post: #7
hugogong Offline
iPXE User
**
 		Posts: 29
Joined: 2019-Dec
Reputation: 0
RE: Why Esxi 6.5 or 6.7 fail to start setup GUI via iPXE
(2019-12-09 10:10)NiKiZe Wrote:  make bin/ipxe.pxe EMBED=fix.ipxe

You probably don't want 64bit anyway.
which version of gcc are you using?
my gcc version --> 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2)
It is fine to make via command "make bin/ipxe.pxe EMBED=fix.ipxe"

however, my machine fails to boot into iPXE menu if I replace the previous file "ipxe.efi" with the new one "ipxe.pxe". I renamed ipxe.pxe to ipxe.efi in order not to change anything in DHCP Service.

Is there any special settings if using ipxe.pxe file instead of ipxe.efi?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Why Esxi 6.5 or 6.7 fail to start setup GUI via iPXE - hugogong - 2019-12-10 04:03



User(s) browsing this thread: 6 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication