Threaded Mode | Linear Mode

sethcall · (This post was last modified: 2012-10-15 16:04 by robinsmidsrod.)

@robinsmidsrod

Thanks for the pointer; set initiator-iqn immediately made it work.

Code:

ifopen net0

dhcp

set initiator-iqn iqn.2001-04.com.example:storage.lun1

sanhook --drive 0x81 iscsi:193.168.1.101:::0:iqn.2001-04.com.example:storage.lun1

I'm not exactly sure why it's required--like I said in rare cases I don't need to. Need to read up.

@Sedorox: thanks--good pointer. In my case the iqn is correct (if misleading because of the :::0: and storage.lun1)

Seth