iPXE discussion forum / iPXE user forums / General v / Problem with iSCSI and WDS (Solved with DHCP route for iPXE User Class)

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problem with iSCSI and WDS (Solved with DHCP route for iPXE User Class)
2013-03-03, 12:09
Post: #13
robinsmidsrod Offline
iPXE forum administrator
*******
 		Posts: 941
Joined: 2011-Apr
Reputation: 15
RE: Problem with iSCSI and WDS (Solved with DHCP route for iPXE User Class)
I just want to chime in and tell everyone that I FINALLY have Windows 7 running inside VirtualBox with the boot drive on iSCSI. Here is an image as proof: https://dl.dropbox.com/u/354628/VirtualB...volume.png

The problem I mentioned above with unsigned drivers can be easily overcome. On the first boot after the WinPE installation, just disable driver signature checking temporarily and the installation will continue as it should. Any subsequent boot does not need driver signing disabled. I'm not sure if this was an issue with my Windows installation media, or something else. At least now I've got something that works that I can continue experimenting with.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Problem with iSCSI and WDS (Solved with DHCP route for iPXE User Class) - robinsmidsrod - 2013-03-03 12:09



User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication