iPXE fail to boot with ixgbevf NIC
|
2013-03-07, 10:57
(This post was last modified: 2013-03-07 10:58 by Gwuieon Jin.)
Post: #1
|
|||
|
|||
iPXE fail to boot with ixgbevf NIC
Dear all.
i had adapted intel ixgbevf NIC driver made by Bernhard Kohl. i build iPXE including ixgbevf NIC driver and make iPXE to excute. but it is hanged like below log. why does it happen? if anyone know reason, please let me know. =============================================== Adding PCI root bus PCI 00:00.0 (8086:0c75) has no driver PCI 00:01.0 (8086:0c46) has no driver PCI 00:03.0 (8086:0c48) has no driver PCI 00:04.0 (8086:0c49) has no driver PCI 00:0e.0 (8086:0c54) has no driver PCI 00:13.0 (8086:0c59) has no driver PCI 00:13.1 (8086:0c5a) has no driver PCI 00:14.0 (8086:0c5f) has no driver PCI 00:1f.0 (8086:0c60) has no driver PCI 01:00.0 (10b5:8717) has no driver PCI 02:00.0 (10b5:8717) has no driver PCI 03:00.0 (18f6:1001) has no driver PCI 04:0f.0 unhandled 64-bit BAR 000001f100050504 PCI 04:0f.0 (18f6:1001) has no driver PCI 04:11.0 unhandled 64-bit BAR 000001f1000a0604 PCI 04:11.0 (18f6:1001) has no driver PCI 04:12.0 unhandled 64-bit BAR 000001f1000e0b04 PCI 04:12.0 (18f6:1001) has no driver PCI 04:13.0 unhandled 64-bit BAR 000001f1000f0f04 PCI 04:13.0 (18f6:1001) has no driver PCI 04:14.0 unhandled 64-bit BAR 000001f100101004 PCI 04:14.0 (18f6:1001) has no driver PCI 06:00.0 (18f6:1001) has no driver PCI 07:0f.0 (18f6:1001) has no driver PCI 07:10.0 (18f6:1001) has no driver PCI 07:11.0 (18f6:1001) has no driver PCI 0b:00.0 (18f6:1001) has no driver PCI 0c:10.0 unhandled 64-bit BAR 000001f1000d0d0c PCI 0c:10.0 (18f6:1001) has no driver PCI 0c:13.0 unhandled 64-bit BAR 000001f1000e0e0c PCI 0c:13.0 (18f6:1001) has no driver PCI 0d:00.0 (8086:10ed) has driver "ixgbevf" PCI 0d:00.0 has mem ff50c000 io 0 irq 0 IXGBEVF: ixgbevf_probe IXGBEVF: netdev allocated at 0x1b6c4 IXGBEVF: netdev physical addr= 0xbfe6eef4 IXGBEVF: &netdev->op = 0x1b6ec IXGBEVF: &netdev->op physical addr= 0xbfe6ef1c IXGBEVF: adapter at 0x1b7b0 initialized IXGBEVF: adapter physical addr= 0xbfe6efe0 IXGBEVF: &adapter->hw: 0x1b7e0 IXGBEVF: &adapter->hw physical addr= 0xbfe6f010 PCI 0d:00.0 latency timer is unreasonably low at 0. Setting to 32. IXGBEVF: mmio_start: 0xff50c000 IXGBEVF: mmio_len: 0x00004000 IXGBEVF: adapter->hw.hw_addr: 0x3f6b87d0 IXGBEVF: mac and mbx procedure pointers initialized IXGBEVF: ixgbevf_probe_succeeded PCI 0d:00.1 (8086:10ed) has driver "ixgbevf" PCI 0d:00.1 has mem ff504000 io 0 irq 0 IXGBEVF: ixgbevf_probe IXGBEVF: netdev allocated at 0x1b9a4 IXGBEVF: netdev physical addr= 0xbfe6f1d4 IXGBEVF: &netdev->op = 0x1b9cc IXGBEVF: &netdev->op physical addr= 0xbfe6f1fc IXGBEVF: adapter at 0x1ba90 initialized IXGBEVF: adapter physical addr= 0xbfe6f2c0 IXGBEVF: &adapter->hw: 0x1bac0 IXGBEVF: &adapter->hw physical addr= 0xbfe6f2f0 PCI 0d:00.1 latency timer is unreasonably low at 0. Setting to 32. IXGBEVF: mmio_start: 0xff504000 IXGBEVF: mmio_len: 0x00004000 IXGBEVF: adapter->hw.hw_addr: 0x3f6b07d0 IXGBEVF: mac and mbx procedure pointers initialized IXGBEVF: ixgbevf_probe_succeeded ok iPXE 1.0.0+ (b17b1) -- Open Source Network Boot Firmware -- http://ipxe.org Features: AoE HTTP iSCSI DNS TFTP bzImage ELF MBOOT PXE PXEXT Menu IXGBEVF: ixgbevf_open IXGBEVF: ixgbevf_setup_tx_resources IXGBEVF: adapter->tx_base = 0xbfe6f480 IXGBEVF: ixgbevf_configure_tx IXGBEVF: IXGBE_VFTDBAL(0): 0xbfe6f480 IXGBEVF: IXGBE_VFTDLEN(0): 128 IXGBEVF: Microseconds until TX Q was enabled: 0 IXGBEVF: ixgbevf_setup_srrctl IXGBEVF: ixgbevf_setup_rx_resources IXGBEVF: ixgbevf_configure_rx IXGBEVF: IXGBE_VFRDBAL(0)= 0xbfe6f500 IXGBEVF: IXGBE_VFRDLEN(0)= 128 IXGBEVF: Microseconds until RX Q was enabled: 0 IXGBEVF: IXGBE_VFRXDCTL(0)= 0x42000000 IXGBEVF: IXGBE_VFRDT(0)= 8 net0: 02:16:e4:c0:02:06 using ixgbevf on PCI0d:00.0 (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] IXGBEVF: IXGBE_VFRXDCTL(0) = 0x42000000 IXGBEVF: Received packet, rx_curr: 0 rx_status: 0x00000083 rx_len: 60 IXGBEVF: adapter->rx_iobuf[0]->data = 0xbfe6f800 IXGBEVF: IXGBE_VFRXDCTL(0) = 0x42000000 IXGBEVF: Received packet, rx_curr: 1 rx_status: 0x00000083 rx_len: 60 IXGBEVF: adapter->rx_iobuf[1]->data = 0xbfe70000 IXGBEVF: IXGBE_VFRXDCTL(0) = 0x42000000 IXGBEVF: Received packet, rx_curr: 2 rx_status: 0x00000083 rx_len: 60 IXGBEVF: adapter->rx_iobuf[2]->data = 0xbfe70800 |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
iPXE fail to boot with ixgbevf NIC - Gwuieon Jin - 2013-03-07 10:57
RE: iPXE fail to boot with ixgbevf NIC - robinsmidsrod - 2013-03-08, 15:50
|
User(s) browsing this thread: 3 Guest(s)