The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 807 - File: showthread.php PHP 7.3.15 (Linux)
File Line Function
/showthread.php 807 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Build iPXE local server ROM-o-matic error!
2013-04-20, 13:21 (This post was last modified: 2013-04-20 13:58 by Gelip.)
Post: #1
Build iPXE local server ROM-o-matic error!
I try build iPXE in local Debian server ROM-o-matic but have error:
Code:
Sorry, no network driver supports PCI codes
10ec:8139
   
If copy NIC file from gPXE /bin folder to iPXE /bin folder there are other errors:
Code:
Build failed. Status = 2
build.php:
Build options:
Build directory is: /tmp/MDCROMioo2f5

$_POST['ofmt'] = "ROM binary (flashable) image (.rom)"
$_POST['nic'] = "all-drivers"
$_POST['pci_vendor_code'] = "10ec"
$_POST['pci_device_code'] = "8139"
Flags:
$flags contains 45 elements:
$flags[PRODUCT_NAME]=""
$flags[PRODUCT_SHORT_NAME]="iPXE"
$flags[CONSOLE_PCBIOS]="on"
$flags[CONSOLE_SERIAL]="off"
$flags[BANNER_TIMEOUT]="20"
$flags[KEYBOARD_MAP]="us"
$flags[LOG_LEVEL]="LOG_NONE"
$flags[NET_PROTO_IPV4]="on"
$flags[COMCONSOLE]="0x3F8"
$flags[COMPRESERVE]="off"
$flags[COMSPEED]="115200"
$flags[COMDATA]="8"
$flags[COMPARITY]="0"
$flags[COMSTOP]="1"
$flags[DOWNLOAD_PROTO_TFTP]="on"
$flags[DOWNLOAD_PROTO_HTTP]="on"
$flags[DOWNLOAD_PROTO_HTTPS]="off"
$flags[DOWNLOAD_PROTO_FTP]="off"
$flags[SANBOOT_PROTO_ISCSI]="off"
$flags[SANBOOT_PROTO_AOE]="off"
$flags[DNS_RESOLVER]="on"
$flags[NMB_RESOLVER]="off"
$flags[IMAGE_ELF]="off"
$flags[IMAGE_NBI]="off"
$flags[IMAGE_MULTIBOOT]="off"
$flags[IMAGE_PXE]="on"
$flags[IMAGE_SCRIPT]="on"
$flags[IMAGE_BZIMAGE]="on"
$flags[IMAGE_COMBOOT]="off"
$flags[AUTOBOOT_CMD]="on"
$flags[NVO_CMD]="on"
$flags[CONFIG_CMD]="off"
$flags[IFMGMT_CMD]="on"
$flags[IWMGMT_CMD]="off"
$flags[ROUTE_CMD]="off"
$flags[IMAGE_CMD]="on"
$flags[DHCP_CMD]="on"
$flags[SANBOOT_CMD]="off"
$flags[LOGIN_CMD]="off"
$flags[TIME_CMD]="off"
$flags[DIGEST_CMD]="off"
$flags[CRYPTO_80211_WEP]="off"
$flags[CRYPTO_80211_WPA]="off"
$flags[CRYPTO_80211_WPA2]="off"
$flags[NETDEV_DISCARD_RATE]="0"
Make output:
Make command: make -C '/tmp/MDCROMioo2f5' 'bin/10ec8139.rom' GITVERSION=445a 2>&1

    make: Entering directory `/tmp/MDCROMioo2f5'
      [DEPS] arch/i386/prefix/romprefix.S
      [DEPS] arch/i386/prefix/mromprefix.S
      [DEPS] arch/x86/core/debugcon.c
      [DEPS] arch/i386/interface/vmware/vmconsole.c
      [DEPS] arch/i386/interface/syslinux/comboot_call.c
      [DEPS] arch/i386/interface/pcbios/bios_smbios.c
      [DEPS] arch/i386/firmware/pcbios/bios_console.c
      [DEPS] arch/i386/core/video_subr.c
      [DEPS] config/config_romprefix.c
      [DEPS] config/config_net80211.c
      [DEPS] config/config_infiniband.c
      [DEPS] config/config_fc.c
      [DEPS] config/config_ethernet.c
      [DEPS] config/config.c
      [DEPS] usr/imgtrust.c
      [DEPS] usr/autoboot.c
      [DEPS] interface/smbios/smbios_settings.c
      [DEPS] interface/smbios/smbios.c
      [DEPS] interface/efi/efi_snp_hii.c
      [DEPS] interface/efi/efi_snp.c
      [DEPS] interface/efi/efi_smbios.c
      [DEPS] interface/efi/efi_driver.c
      [DEPS] interface/efi/efi_console.c
      [DEPS] net/udp/syslog.c
      [DEPS] net/tcp/syslogs.c
      [DEPS] net/netdevice.c
      [DEPS] core/serial_console.c
      [DEPS] core/serial.c
      [DEPS] core/main.c
      [DEPS] core/log.c
      [DEPS] core/image.c
      [DEPS] core/downloader.c
    make: Leaving directory `/tmp/MDCROMioo2f5'
    make: Entering directory `/tmp/MDCROMioo2f5'
      [BUILD] bin/__divdi3.o
      [BUILD] bin/__moddi3.o
      [BUILD] bin/__udivdi3.o
      [BUILD] bin/__udivmoddi4.o
      [BUILD] bin/__umoddi3.o
      [BUILD] bin/icc.o
      [BUILD] bin/memcpy.o
      [BUILD] bin/acpi.o
      [BUILD] bin/ansiesc.o
      [BUILD] bin/asprintf.o
      [BUILD] bin/assert.o
      [BUILD] bin/base16.o
      [BUILD] bin/base64.o
      [BUILD] bin/basename.o
      [BUILD] bin/bitmap.o
      [BUILD] bin/bitops.o
      [BUILD] bin/blockdev.o
      [BUILD] bin/console.o
      [BUILD] bin/cpio.o
      [BUILD] bin/ctype.o
      [BUILD] bin/cwuri.o
      [BUILD] bin/debug.o
      [BUILD] bin/debug_md5.o
      [BUILD] bin/device.o
      [BUILD] bin/downloader.o
      [BUILD] bin/edd.o
      [BUILD] bin/errno.o
      [BUILD] bin/exec.o
      [BUILD] bin/fnrec.o
      [BUILD] bin/gdbserial.o
      [BUILD] bin/gdbstub.o
      [BUILD] bin/gdbudp.o
      [BUILD] bin/getkey.o
      [BUILD] bin/getopt.o
      [BUILD] bin/hw.o
      [BUILD] bin/i82365.o
      [BUILD] bin/image.o
      [BUILD] bin/init.o
      [BUILD] bin/interface.o
      [BUILD] bin/iobuf.o
      [BUILD] bin/job.o
      [BUILD] bin/linebuf.o
      [BUILD] bin/lineconsole.o
      [BUILD] bin/list.o
      [BUILD] bin/log.o
      [BUILD] bin/main.o
      [BUILD] bin/malloc.o
      [BUILD] bin/memblock.o
      [BUILD] bin/menu.o
      [BUILD] bin/misc.o
      [BUILD] bin/monojob.o
      [BUILD] bin/null_nap.o
      [BUILD] bin/null_reboot.o
      [BUILD] bin/null_sanboot.o
      [BUILD] bin/null_time.o
      [BUILD] bin/nvo.o
      [BUILD] bin/open.o
      [BUILD] bin/parseopt.o
      [BUILD] bin/pc_kbd.o
      [BUILD] bin/pcmcia.o
      [BUILD] bin/pending.o
      [BUILD] bin/posix_io.o
      [BUILD] bin/process.o
      [BUILD] bin/random.o
      [BUILD] bin/refcnt.o
      [BUILD] bin/resolv.o
      [BUILD] bin/serial.o
      [BUILD] bin/serial_console.o
      [BUILD] bin/settings.o
      [BUILD] bin/string.o
      [BUILD] bin/stringextra.o
      [BUILD] bin/strtoull.o
      [BUILD] bin/time.o
      [BUILD] bin/timer.o
      [BUILD] bin/uri.o
      [BUILD] bin/uuid.o
    make: *** No rule to make target `../.git/index', needed by `bin/version.o'.  Stop.
    make: Leaving directory `/tmp/MDCROMioo2f5'
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Build iPXE local server ROM-o-matic error! - Gelip - 2013-04-20 13:21



User(s) browsing this thread: 1 Guest(s)