iPXE discussion forum / iPXE user forums / General v / iSCSI boot shows error at boot time using OpenELEC

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
iSCSI boot shows error at boot time using OpenELEC
2013-08-22, 09:51
Post: #7
robinsmidsrod Offline
iPXE forum administrator
*******
 		Posts: 941
Joined: 2011-Apr
Reputation: 15
RE: iSCSI boot shows error at boot time using OpenELEC
You might want to verify that your NIC hardware is working properly. You can do a complete loopback test by going through the steps detailed at http://ipxe.org/dev/driver and report back if your cards work properly. If your cards check out properly you might have an issue with your iSCSI server and how it communicates. Not sure which software the Synology uses, but it might have some odd behavior iPXE gets confused by. Have you been able to iSCSI-boot anything else from that iSCSI server?
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: iSCSI boot shows error at boot time using OpenELEC - robinsmidsrod - 2013-08-22 09:51



User(s) browsing this thread: 2 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication