iSCSI boot shows error at boot time using OpenELEC

[robinsmidsrod]

(2013-09-10 17:24)tom_major Wrote:  Did the loop test and sometimes it gives me the following error for either one or both nics after the "Link:up" message:

Code:

[RXE: 1 x "Operation not supported (http://ipxe.org/3c1be003)"]

The packet counter displayed by lotest increases steadily and rapidly.

As long as the counter increases steadily in both directions (both receive and transmit) everything is supposed to be okay. To ensure you have no issues you should also test the high MTU and high bandwidth tests available from the same location, they can sometimes give more clues.