windows 7 iscsi boot fail

[3lixy]

Hey guys,

Firstly a nice piece of software iPXE many thanks for your work.

I was able to install windows 7 to an iscsi target using wimboot flawlessly thanks to your guide.

My problem is that when I try to boot to the iscsi lun there is a startup error or crash (depending on ipxe script config).

This config:

#!ipxe
sanboot iscsi:192.168.0.17:::0:iqn.2000-01.com.synology:HARPY.name

has the following error


----------

This config:

#!ipxe
sanboot --no-describe iscsi:192.168.0.17:::0:iqn.2000-01.com.synology:HARPY.nam

windows starts to boot the logo appears then a few seconds later it crashes and reboots

any ideas would be appreciated.


side note: I also cannot sanboot win7install iso's either.