iPXE discussion forum / iPXE user forums / General v / Problem with EFI PXE booting and the snponly.efi target

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problem with EFI PXE booting and the snponly.efi target
2013-11-14, 10:10
Post: #8
Fred_Lin Offline
iPXE User
**
 		Posts: 2
Joined: 2013-Oct
Reputation: 0
RE: Problem with EFI PXE booting and the snponly.efi target
Dear Robinsmidsrod ,

Please guide me how to load grub.efi and then let it handle loading the kernel. Thanks a lot .

The following is my trial .

===

iPXE> chain http://192.168.202.1/grub.efi
http://192.168.202.1/grub.efi... ok
Could not boot: No such device (http://ipxe.org/2c048007)
iPXE> imgfetch http://192.168.202.1/grub.efi
http://192.168.202.1/grub.efi... ok
iPXE> boot
Could not boot: No such device (http://ipxe.org/2c048007)
iPXE> kernel http://192.168.202.1/grub.efi
http://192.168.202.1/grub.efi... ok
iPXE> boot
Could not boot: No such device (http://ipxe.org/2c048007)

===
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Problem with EFI PXE booting and the snponly.efi target - Fred_Lin - 2013-11-14 10:10



User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication