CTRL-B required to activate NICs PXE Image?

[hegi]

(2017-09-16 19:10)NiKiZe Wrote:  As with any boot ROM it is only there and the BIOS initializes the ROM. However actually booting it requires that it is the "next boot device" so changing the boot order in BIOS is what you want to do.

Well, too bad, then I have to use the workaround via USB-Image. But the Bios does not offer network boot for other than the internal device .

If the CTRL-B Message shows up, then there is some sort of code that gets executed within the POST. - So I was hoping, from there the netboot could also be tweaked.

Anyhow, thanks a lot.

Hegi.