Inside Security (insert)

[draugadrottinn]

Ha! I "kinda" figured it out...

So, I'm using iPXE to chainload PXE to boot knoppix. Here's what I have:

imbedded.ipxe above - as it's part of ipxelinux.0 when I create it; but does not effect the way Knoppix is being loaded so it's not necessary.

menu.ipxe is as follows:
***************************************************************
echo Booting Knoppix 7.2
set use-cached 1
dhcp
set 209:string http://###.###.###.4/knoppix-tftpboot/px...noppixboot
set 210:string tftp://###.###.###.4/knoppix-tftpboot/
chain ${210:string}knoppix.0
goto start
***************************************************************
http://###.###.###.4/knoppix-tftpboot/px...noppixboot (again, APPEND is one line):
***************************************************************
TIMEOUT 1
DEFAULT http://###.###.###.4/knoppix-tftpboot/linux
APPEND nfsdir=###.###.###.4:/var/lib/tftpboot/knoppix-tftpboot/cdrom nodhcp lang= ramdisk_size=100000 init=/etc/init apm=power-off nomce loglevel=1 2 initrd=http://###.###.###.4/knoppix-tftpboot/miniroot.gz libata.force=noncq tz=localtime lang=en apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 noswap nofstab nopcmcia nofirewire BOOT_IMAGE=knoppix
***************************************************************

Hopefully this will help with anyone else having this issue. I still could not figure out how to do it with only iPXE, but this is a close second that will work.

Good luck everyone.