wimboot using grub2 on EFI

[sherpya]

unfortunately still nothing, but looks like the file: protocol is working:

Code:

iPXE> kernel file:/boot/wimboot
file:/boot/wimboot... ok
iPXE> initrd file:/dart/BCD
file:/dart/BCD... ok
iPXE> initrd file:/dart/boot.sdi
file:/dart/boot.sdi... ok
iPXE> initrd file:/dart/boot.wim
file:/dart/boot.wim... ok
iPXE> boot
Could not boot: No such device (http://ipxe.org/2c048087)
iPXE>

---

by skipping efi_pxe_install() and efi_image_path() call I was able to start wimboot executable
but then it fails:

Code:

wimboot v2.6.0 -- Windows Imaging Format bootloader -- http://ipxe.org/wimboot

Command line: "wimboot"
Could not open simple file system: 0x8000000000000002
Could not boot: Error 0x7f048281 (http://ipxe.org/7f048281)

I suppose it should be possible to setup needed structures for wimboot while skipping not applicable calls for snp protocol