ipxe windows boot issue on 2nd interface

[rajeshsg]

(2019-11-06 21:53)NiKiZe Wrote:  Did you also install windows using "net1" ?

You will probably have to check iSCSI logs, or resort to tcpdump to see if the interface keeps communicating after iPXE closes at all.
My first guess is that windows don't bring up the interface at all.

You might also want to disable "net0" during installation, and once that is completed re-enable "net1" again and see if that get's you going.
Once you/we know what is working and not, there might be a possible workaround.

Thanks for the quick reply, NIKiZe.

I didn't install on iscsi disks. I did install on local disks, disabled the filter drivers on interfaces (so that iscsi boot is allowed) and then moved the data (sort of full copy) to iscsi disks and then trying to access those iscsi disks (having installed windows,) using ipxe sanboot iscsi commands.

The only issue being second interface lands me into the troubles I mentioned before (links provided in original question,) whereas booting using first interface is always fine. I have made sure, before copying data to iscsi disks, to disable the appropriate filters so that all the interfaces are allowed for iscsi booting.